How to: Change the password on a ByteBlower server
Posted by Wouter Debie, Last modified by Dries Decock on 03 April 2018 01:47 PM
ByteBlower systems are shipped with following default username/password. You can use this password to remotely login into the system over ssh.
Follow these steps to change the password
1. Login into the system
Connect to the server using either a keyboard / screen or by using ssh.
2. Change the password
Use the passwd command to change your password.
NOTE: There is no way to recover the password once it is lost. In case of loss, the system needs to be re-installed ( contact support in this case )
Start the byteblower-configurator
Continue after the welcome message
Select "System configuration"
Choose "Change root password"
Provide your new password ( no chars will be shown in the dialog )
Retype your new password
Go back to the main menu
Save and exit
Confirm to save and apply