Remote access to your ByteBlower
Posted by Wouter Debie, Last modified by Wouter Debie on 17 October 2019 11:49 AM

If you want to have remote access to your ByteBlower you will need to configure your network to allow following traffic to the management interface of ByteBlower.

Protocol Portnumber Description
TCP 9002 Management traffic GUI/API <--> ByteBlower Server Application
TCP 22 SSH
TCP 9101 Management traffic GUI/API <--> MeetingPoint Server Application
TCP 9100 Heartbeat traffic Wireless Endpoint (WE) <--> MeetingPoint Server Application

When you don't have a Meetingpoint License on you system, then the last 2 are not required.

(3 vote(s))
Helpful
Not helpful

Comments (0)

We to help you!