Knowledge base
How to: Find the management IP
Posted by Wouter Debie, Last modified by Dries Decock on 03 April 2018 01:48 PM

Depending on the version running on the ByteBlower, there are 2 methods to retrieve its management IP. By default, the system will obtain his management ip through DHCP/Stateless Autoconfiguration.

If you want to use a fixed ip, read here on how to configure this.

Versions 2.6.0 and up

Once the system is booted and you have attached a keyboard and screen, you will be presented with a login-dialog.

The login screen will show the management IP-address. In this example the management IP for this system is

IPv4 10.8.254.66
IPv6 fdec:5ef9:84b5:40fe:4b00:287e:fd9e:6c37

Pre 2.6.0 system

Once the system is booted and you have attached a keyboard and screen, you will be presented with a login-dialog.

In this version, you have to login to know the ip-address of the management interface. Below are the default login that you can use if you haven't changed them

Username root
Password excentis

 After the login you can use following command

ifconfig man0

 

(1 vote(s))
Helpful
Not helpful

Comments (0)

We to help you!