How to: Configure the XRA-31 management IP address
Posted by Tom Ghyselinck, Last modified by Tom Ghyselinck on 14 February 2018 12:28 PM
By default the XRA-31 system will use DHCP to get its management IP. In some lab-environments this is not wanted. This page explains you how you can configure a fixed IP on the management interface.
All this configuration is done by using the Wicd tool on the system.
Start the Wicd graphical UI from either the main menu
or via the network configuration icon on the bottom right on your screen
The main status and configuration window will open.
Select "Use Static IPs"
Configure DNS settings:
Press "OK" to save the changes.
Disconnect + re-connect to apply the changes immediately.
The connection will be established now with the new configuration: