Excellence in connectivity.

UPLOAD LOGO

Results
Config Info
Favorites

Support

Old report style

To enable the old report style,
go to the ByteBlower GUI and navigate to: File -> Project Properties -> Report,
and check "Standard HTML report"

ByteBlower Report Summary

L4S on Wi-Fi Demo

Scenario info

Project L4S on Wi-Fi Demo
Scenario UDP and TCP L4S congestion downstream
State FINISHED
Author Tom Ghyselinck

Scenario start 2024-02-09T16:43:44.133
Scenario end 2024-02-09T16:44:52.912
GUI Version 2.21.99.v202402051434

Flows with this warning symbol have one or more associated warnings. See warning table at the bottom of the "results" section for details.

Favorites

Favorited results appear here. You can mark a result as favorite by clicking the 'star' icon.

... No rows favorited ...

Legend

Loss Legend

	Loss	< 0%
0.0% ≤	Loss	< 1.0%
1.0% ≤	Loss	< 1.0%
2.0% ≤	Loss	≤ 100%

Throughput Legend

Frame (as displayed in the Frame View)
FCS (CRC Frame Checksum, 4 bytes)

IPv4 ByteBlower Ports

Port	MAC Address	IPv4 Address	Default Gateway	Netmask	NAT	VLAN	MTU	Docked
NSI	00:ff:bb:48:00:01	192.168.68.53	192.168.68.1	255.255.252.0	No	No	1500	trunk-1-1 on Nevele ByteBlower Server - 2.21.3
CPE	00:ff:bb:48:00:02	192.168.68.52	192.168.68.1	255.255.252.0	No	No	1500	trunk-1-2 on Nevele ByteBlower Server - 2.21.3

ByteBlower Servers

Host	IP Address	Server Type	Server Version
10.11.1.201	10.11.1.201	3100	2.21.3

Frame Blasting Flows: Info

Flow	Flow Template	Flow Start	Configured Duration	Rate (Frames/s)	Frame Size (Bytes)	Intended Load	TOS/DSCP
Downstream UDP 600Mbps	UDP 500Mbps	0.0s	60.0s	73243.97568300007	1024	6.000146487951366E8	0x00

TCP Flows: Info

Flow	Flow Template	Flow Start	Requested Payload Size (bytes)	Duration	Initial Receive Window (bytes)	Initial Receive Window Scale	Rate Limit	HTTP Method	TOS	L4S
Downstream TCP L4S	TCP L4S	20.0s	Not Set	20.0s	65535	7	600000000	GET	0x0	Yes

Throughput units

bps
kbps
Mbps
Gbps

Latency units

Frame Blasting Table

Flow Information

	Flow name	Source	Destination	Frame loss	Byte loss	Avg throughput	Avg latency
Downstream UDP 600Mbps	NSI	CPE	4.095900504205352E-4	4.095900504205352E-4	6.000168347956921E8	2596497
Tx bytes 4500109312 Rx bytes 4500090880 Duration59.999528267 Tx frames 4394638 Rx frames 4394620 Min latency 979637 Max latency 18385136 Jitter 1682865

Combined Latency Overview

	CCDF
Logarithmic Latency CCDF Graph

TCP Table

Flow Information

	Flow name	Source	Destination	Avg Throughput	Min RTT	Max RTT
Downstream TCP L4S	NSI	CPE	2.5917951488826334E8	1618882	11836827
Tx bytes 647950663 Rx bytes 647950663 Duration 20.000057899 StatusFINISHED Congestion avoidance algorithmSACK with cubic

Aggregated Throughput

	Port	Type (Rx/Tx)	Bytes	Alive Duration	Alive Throughput	Active Duration	Active Throughput
CPE	Rx	647950663	20.000057899	3.239743936103292E7	20.000057899	3.239743936103292E7
NSI	Tx	647950663	19.999349477000003	3.2398586951298967E7	19.999349477000003	3.2398586951298967E7

In the journey of a thousand miles,
the first step is the most
important.

Begin your network optimization journey with ByteBlower, your trusted guide.

ByteBlower Report Summary

L4S on Wi-Fi Demo

Scenario info

Favorites

Legend

Loss Legend

Throughput Legend

IPv4 ByteBlower Ports

ByteBlower Servers

Frame Blasting Flows: Info

TCP Flows: Info

Frame Blasting Table

Flow Information

Combined Latency Overview

TCP Table

Flow Information

Aggregated Throughput

In the journey of a thousand miles, the first step is the most important.

In the journey of a thousand miles,
the first step is the most
important.